Non-Fader Output Settings (Output); Speaker Layout Settings (Sp Layout); Importing Sound Data (Sound Data) - Eclipse CD7100 Manual Del Propietário

Non-Fader Output settings (Output)

Press the [SELECT] (Lower) button
1
to select the Output.
Press the [SELECT] (Right/Left)
2
button to select
Monaural.
Right: Monaural
Left: Stereo
Press the [CUSTOM/MENU]
3
[RTN] button
adjustment mode.
Speaker layout settings (SP
Layout)
Depending upon speaker layout, you can switch
between 3-way and 4-speaker systems. (Select a
system configuration before adjusting PEQ, time
alignment or cross over.)
Press the [SELECT] (Upper/ Lower)
1
button to select the SP Layout.
2
Press the [ENTER] button.
The speaker layout setting mode is
activated.
Press the [SELECT] (Upper/ Lower)
3
button to select 3 WAY or 4 SP+SW.
Press the [ENTER] button for more
4
than five seconds.
"OK?" message will appear.
Press the [ENTER] button for less
5
than one second.
Press the [CUSTOM/MENU]
6
[RTN] button
adjustment mode.
CAUTION
When switching between 3 WAY and 4
SP+SW mode, please make sure that
the volume level is set to 0.
Stereo or
or
to exit sound
or
to exit sound
How to operate the Sound Adjustment Mode
Importing Sound Data (Sound
Data)
Sound data adjusted by the E-iSERV website
can be downloaded to a CD-R or a USB memory
and imported into the main unit.
Press the [SELECT] (Upper/ Lower)
1
button to select the Sound Data.
2
Press the [ENTER] button.
The sound data importing mode is
activated.
Press the [SELECT] (Upper/ Lower)
3
button to select media types (Disc
or USB).
4
Press the [ENTER] button.
• When selecting a CD-R:
The front panel will open automatically.
• When selecting a USB:
The message is displayed until a USB
memory is connected.
Insert the CD-R or connect the USB
5
memory.
The files are automatically read.
Press the [SELECT] (Upper/ Lower)
6
button to select files.
7
Press the [ENTER] button.
Select from buttons [1] through [5],
8
and press and hold for 2 seconds
or more.
The selected file is written to the
selected button.
When using a CD-R, the CD-R will
eject automatically when writing is
complete.
The display will return to the file
selection screen.
XI
61