Eclipse CD7100 Manual Del Propietário página 59

2
Press the [ENTER] button.
The crossover
activated.
Press the [ENTER]
3
crossover adjustment channel.
Each time the button is pressed, the
channel changes in the following
order.
When the 4-speaker layout is selected:
Front → Rear → Woofer → Front →
When the 3 way speaker layout is
selected:
HPF → Mid-LPF → Mid-HPF → LPF →
HPF →
Press the [SELECT] (Right/Left)
4
button to select
frequency.
When the button is pressed, the
frequency changes in the following
order.
When the 4-speaker layout is selected:
Front/Rear:
63 Hz ↔ 80 Hz ↔ 100 Hz ↔ 125 Hz ↔
160 Hz ↔ 200 Hz ↔ 250 Hz ↔ 315 Hz
↔ 400 Hz ↔ 500 Hz ↔ 630 Hz ↔
800 Hz ↔ 1kHz ↔ 1.25kHz ↔ 1.6 kHz
↔ 2 kHz ↔ 2.5 kHz ↔ 3.15 kHz ↔
4kHz ↔ 5kHz ↔ 6.3 kHz ↔ 8kHz ↔
10 kHz
Woofer:
20 Hz ↔ 25 Hz ↔ 31.5 Hz ↔ 40 Hz ↔
50 Hz ↔ 63 Hz ↔ 80 Hz ↔ 100 Hz ↔
125 Hz ↔ 160Hz ↔ 200 Hz
setting mode is
button to
the cut-off
How to operate the Sound Adjustment Mode
When the 3 way speaker layout is
selected:
M-LPF/Hi:
200 Hz ↔ 250 Hz ↔ 315 Hz ↔ 400 Hz
↔ 500 Hz ↔ 630 Hz ↔ 800 Hz ↔
1kHz ↔ 1.25kHz ↔ 1.6 kHz ↔ 2 kHz
↔ 2.5 kHz ↔ 3.15 kHz ↔ 4kHz ↔
5kHz ↔ 6.3 kHz ↔ 8kHz ↔ 10 kHz
M-HPF/Low:
20 Hz ↔ 25 Hz ↔ 31.5 Hz ↔ 40 Hz
↔ 50 Hz ↔ 63 Hz ↔ 80 Hz ↔ 100 Hz
↔ 125 Hz ↔ 160Hz ↔ 200 Hz
Press the [SELECT] (Upper/ Lower)
5
button to set the slope.
The slope can be set to "Pass", "6dB/
oct", "12dB/oct", "18dB/oct" or "24dB/
oct".
Upper: The
gentle.
Lower: The slope becomes steeper.
Repeat the operations in steps 3 to
6
5 to change the settings for each
channel.
Press the
7
[RTN] button
adjustment mode.
slope becomes more
[CUSTOM/MENU]
to exit sound
XI
or
59