Multi-Harmonizer Settings (Harmonizer); Non-Fader Settings (Non-F Setting); Non-Fader Phase Settings (Phase) - Eclipse CD7100 Manual Del Propietário

Various Settings
Multi-harmonizer settings
(Harmonizer)
This function uses harmonic synthesis to restore
the high-frequency component that is lost as a
result of the compression process so that fresher
sound can be obtained during MP3 /WMA, USB
memory playback.
Press the [SELECT] (Upper/ Lower)
1
button to select the Harmonizer.
2
Press the [ENTER] button.
The harmonizer setting
activated.
Press the [SELECT] (Upper/ Lower)
3
button to select the setting item.
When the button is pressed, the
setting item changes in the following
order.
↔ Low ↔ Hi ↔ OFF ↔
Hi: High effectiveness
Low: Low effectiveness
The selected settings will take effect.
Press the [CUSTOM/MENU]
4
[RTN] button
adjustment mode.
60
mode is
or
to exit sound
Non-fader settings (Non-F
Setting)
• Non-fader phase (Phase)
The merging of sound between the front and
rear speakers and the woofer can be
improved by selecting the phase. Switch the
phase to a phase which lets the speakers
combine without any disharmony.
• Non-Fader Output (Output)
Non-Fader Output can be stereo or mono.
Select the method that matches the output
method for the sub-woofer system that is
connected to the main unit.
Press the [SELECT] (Upper/ Lower)
1
button to select the NF Setting.
2
Press the [ENTER] button.
The non-fader
activated.

Non-fader phase settings (Phase)

Press the [SELECT] (Upper) button
1
to select the Phase.
Press the [SELECT] (Right/Left)
2
button to
Reverse.
Right: Reverse
Left: Normal
Press the [CUSTOM/MENU]
3
[RTN] button
adjustment mode.
setting mode
select Normal
to exit sound
is
or
or