Welby TEN 603 Manual Del Usuario página 18

Safety
Notes on using the TENS/EMS device
− The adhesive electrodes may only be con-
nected to the TEN 603 TENS/EMS device. Please
ensure that the device is always switched off
when attaching or removing the adhesive
electrodes.
− Always switch off the device before reposition-
ing the adhesive electrodes of the TENS/EMS
device during use.
− Under some circumstances, use of the TENS/EMS
device can irritate the skin. If skin irritations arise
such as redness, blistering or itching, discontin-
ue use of the TENS/EMS device. Do not always
attach the adhesive electrodes in the exact same
locations, as this can lead to skin irritation.
Before using the device, you should thoroughly
cleanse and then dry the areas of the skin where
you intend to place the adhesive electrodes. The
skin should be clean and free of oils.
Do not connect the lead wires and adhesive elec-
trodes unless the TENS/EMS device is switched off.
− To avoid damaging the wires, do not pull on
them to disconnect them from the adhesive
electrode plug connections or from the device.
Always pull from the plugs when removing the
lead wires from the adhesive electrodes or the
device.
18