Washing Clothes; Atc (Auto Temperature Control) - Samsung WA456 Serie Manual De Usuario

Iflight f rom alight b ulb, fluorescent bulb, orlamp isreflected onthedisplay panel of
thewashing machine, thesmartphone may notbeable torecognize thepanel orerror
message easily.
Ifyouhold thesmartphone attoolarge a nangle relative tothefront o fthe display panel,
itmay notbeable torecognize theerror c ode. F or b est r esults, hold the smartphone so
that t hefront o fthepanel and thesmartphone areparallel ornearly p arallel.
Washing clothes using the cycle selector
Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Control"
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Press the Power button.
2. Open the lid.
3. Load the articles of clothing one at a time loosely into the drum, without overfilling it.
4. Add liquid (or powder) detergent, softener, and/or bleach (if necessary) to the appropriate
compartments. See pages 25-27.
5. Close the lid.
6. Use the Cycle Selector to select the appropriate cycle according to the type of material:
Normal, Heavy Duty, Colors/Darks(WA456*), Bedding, Spin, Rinse+Spin, Perm Press, Active
Wear(WA456*), Delicates/Hand Wash, Quick Wash, Pure Cycle
TM.
The relevant indicators will
illuminate on the control panel.
7. At this time, you can control the wash temperature, the number of rinse cycles, the spinning
speed, and the delay time by pressing the appropriate option button.
8. Press the Start/Pause button on the Cycle Selector and the wash will begin. The process
indicator will light up and the remaining time for the cycle will appear in the display.
Fot the Heavy Duty will utilize only hot water, even if you select the Cold wash temperature.
CAUTION
Pause Option
When the Garment + LED is on, you can add laundry items to or remove laundry items from the
wash.
To remove or add laundry items when the Garment + LED is on, follow these steps:
1. Press the Start/Pause button to unlock the lid.
_The lid cannot be when the water is too HOT.
opened
2. Remove or add laundry items.
3. Close the lid, and then press the Start/Pause button to restart the wash.
[_lf have Child Lock must deactivate it first. See 21.
you
on,
you page
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the lid.
2. Remove laundry.
ATC (AUTO TEMPERATURE CONTROL)
ATC is the control function that the washer controls water temperature with temperature sensor (thermistor).
_ ecause there are numerous water temperatures depending on the customer's environments(cold
areas, warm areas, various water temperature, settings of heater temperature, etcs), ATC function in
our washer maintains the certain level of wash temperature to output the best washing performance at
each cycle.
lf you select normal & heavy duty course, those courses are the regulation and UL course. Since new
washer must reduce the amount of energy usage at first priority, customer will notice more cold water
entering the washer. But This is Normal, not a problem.
ln those regulation course, Hot temperature is similar to acceptable adult bath-water temperature and
warm temperature is similar to comfortable swimming-pool water temperature.
If customer want to wash clothes in specific water temperature, customer should choose a different
course at each temperature(Hot/Warm/Eco Warm)
24 washng a oad of aundry