Bartscher FW 80 Instrucciones De Uso página 11

Operation
Avoid contacting
moving parts!
Never feed food by hand. Always
use the pusher.
Start appliance by turning switch (10) to the
right (position 1). The power indicator light
(9) will flash up.
By turning switch to the left (position R) the
motor will run reverse. This service is
allowed only a short time!
If something unsuitable got into the filler
tube or if the motor is overloaded, the safety
switch (14) will trip after approx. 10 seconds
and stop the appliance
In this case switch off the motor, wait about
10 seconds, reset the overload switch by
pressing it in and turn the switch shortly left
(position R).
Then unplug the appliance and disas-
semble the mincer attachment. Remove all
residues from the parts. After reassembling
you can continue work.
.
Disassembling
First unplug the universal mincer at-
tachment from the motor unit.
Therefore loosen the fixing screw (11) and
pull out the mincer attachment.
Unscrew the locking ring (1) by turning
counter clockwise and pull out cutting
device (2+3) as well as feed worm (
Cleaning
All parts are not
dishwasher-proof!
Never immerse the mincer in
water or hold it under a
running tap!
Pull out the power cord.
Wipe the motor unit clean with a damp
cloth.
Dismantle the mincer attachment and wash
all its parts with warm water and a little
washing up liquid. Then dry all parts
immediately.
Knife and plate should be preserved with
cooking oil to avoid corrosion.
4).
- 9 -