Manufacturer's Warranty - Hilti TE 50-AVR Manual De Usuario

Trouble or fault
The drill bit can't be released.
The service indicator lights
after changing the carbon
brushes.
10 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as household waste!
11 RoHS (Restriction of Hazardous Substances)
Click on the link to go to the table of hazardous substances: qr.hilti.com/r4902202.
There is a link to the RoHS table, in the form of a QR code, at the end of this document.
12

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
20 English
Printed: 12.12.2018 | Doc-Nr: PUB / 5283607 / 000 / 05
Possible cause
The chuck is not pulled back fully.
The side handle is not fitted cor-
rectly.
The contact surfaces are not yet
run in.
Action to be taken
▶ Pull the chuck back as far
as it will go and remove the
accessory tool.
▶ Release the side handle and refit
it correctly so that the clamping
band and side handle engage in
the recess.
▶ Run in the carbon brushes by
allowing the power tool to run
under no load for at least 1
minute without interruption.
2102965
*2102965*