Accessing And Using The Select Functions Menu; Volume - Siemens xTronic HG2415UC Manual De Uso Y Cuidado

SELECT FUNCTIONS is the section of the menu where you can set or change the following features on your range:
VOLUME (decrease or increase loudness of
control beeps)
TEMPERATURE FORMAT (switch temperature
scale to Fahrenheit or Celsius)
TIME FORMAT (12 hr or 24 hr)
LOCK KEYS (oven control pad lockout )
LANGUAGE OPTION (for display; select
English, Spanish, or French)
CLOCK DISPLAY (yes or no)
OVEN TEMPERATURE OFFSET (used to
calibrate the oven temperature)
DEMO MODE (used by appliance stores)
RESET DEFAULTS (change all function
settings back to original factory settings)
SABBATH FEATURE (for religious faiths with
"no work" requirements on the Sabbath)
NOTE: In the event of a power failure, the functions
return to the factory settings and will need to be reset.
Accessing and Using the Select Functions
Menu
To access the SELECT FUNCTIONS menu, touch and
hold COOKING MODE touch pad for five (5) seconds.
SELECT FUNCTION is displayed.
1. Turn knob to desired feature.
2. Press START to choose any function, and turn
knob to choose any sub-functions.
3. After selecting feature, touch OFF.
See next page for further information.
Setting Up Your Range
TIPS for Setting Functions
• There will be a slight delay
before each message (or
feature) can be seen in the
display.
• Turn knob slowly, and wait
approximately one second
for display to show next
feature.
• To move through the feature
menu, slowly turn the knob
clockwise one click after each
feature appears.
BEEPS
To indicate when a mode is
finished, 3 consecutive beeps
will sound.
NOTE:
In the event of a power failure,
the functions return to the
factory settings and will need
to be reset.