Tabla de contenido
Idiomas disponibles
Idiomas disponibles
eN
dear customer,
Thank you for purchasing an ALFRA product. Be sure to read these operation instructions
closely before using your device for the first time and keep them for later reference.
SAFETy inSTRucTiOnS
Danger can occur when working with this machine due to improper handling and/or poor maintenance,
which may lead to the destruction of the device and to severe physical injuries. Observe all safety
instructions of this operating manual and contact our Service Team if you have any questions.
!
Always...
• activate the magnet on metallic, ferromagnetic
materials
• use the whole magnetic surface for working
• work on plane surfaces
• clean the magnetic surface and keep it clear of
dirt, swarf and welding sputter
• set the core drilling machine down gently to
prevent damage to the magnetic surface
• secure yourself with a safety belt when drilling
on walls or ceilings
• check connection cables for damage
• make sure the mains voltage matches the
machine
• follow the instructions in these operation
instructions
• familiarise new users with the safe use
of the machine
• wear safety goggles and ear protection
during work
• use safety guard if supplied
• observe local, country-specific guidelines
• store and use in a dry place
people with cardiac pacemakers or other medical appliances may only
use this machine following approval by their physician.
never touch rotating parts! keep hands and fingers away from the work area
while the motor is running! Failure to do so can result in severe injuries!
!
never...
• work on round or curved objects
• drill several work pieces on top of one another
• modify the core drilling machine or
remove signs
• use the core drilling machine when damaged
or when parts are missing
• strain or damage the underside of the magnet
through heavy impact or blows
• use the core drilling machine without having
been properly instructed
• operate the machine without having read and
understood the complete operating manual
• use the core drilling machine to support,
lift or transport persons or loads
• carry out electric welding work on the work
piece at the same time as using the core
drilling machine
• store or operate the core drilling machine at
temperatures above 50°C (122°F)
• leave the machine hanging unsupervised
• allow the machine to come into contact with
corrosive materials
9
Tabla de contenido
