Tabla de contenido
Idiomas disponibles
Idiomas disponibles
eN
dear customer,
Thank you for purchasing an ALFRA product. Read these operation instructions closely before using
your device for the first time and keep them for later reference.
SAFETy inSTRucTiOnS
During work with this machine, improper handling and/or poor maintenance may result in significant
danger which can lead to destruction of the machine and serious accidents with considerable injuries.
Observe all safety instructions of this operation manual and contact the manufacturer if you have any
questions.
!
Always...
• activate the switchable permanent magnet
completely
• activate the magnet on metallic, ferromagnetic
materials
• use the whole magnetic surface for working
• work on plane surfaces
• clean the magnetic surface and keep it clear of
dirt, swarf, metal shavings and welding sputter
• set the core drilling machine down gently to
prevent damage to the magnetic surface secure
the machine with a safety belt when drilling on
walls or ceilings
• check connection cables for damage
• make sure the mains voltage matches the
machine ́s capacity follow the instructions in the
operation manual
• familiarize new users with the safe use of the
machine
• wear safety goggles and ear protection during
work
• use protective shield, if supplied
• observe local and country-specific guidelines
• use and store in a dry place
People with cardiac pacemakers or other medical appliances may only use
this machine following approval by their physician.
never touch rotating parts! keep hands and fingers away from the work area
while the motor is running! Failure to do so can result in severe injuries!
!
never...
• begin drilling without activating the
magnet first
• work on round or curved objects
• drill several work pieces on top of one another
• modify the core drilling machine or remove signs
• use the core drilling machine when damaged
or when parts are missing
• strain or damage the underside of the magnet
through heavy impact or blows
• use the core drilling machine without having
been properly instructed
• operate the machine without having read and
understood the complete operation manual
• use the core drilling machine to support, lift or
transport persons or loads
• carry out electric welding work on the work
piece at the same time as using the
core drilling machine
• store or operate the core drilling machine at
temperatures above 50°C (122°F)
• leave the machine hanging unsupervised
• allow the machine to come into contact with
corrosive materials
11
Tabla de contenido
