Replacing the Stamp Cartridge (Feeder) (Optional)
Originals sent via the feeder can be stamped to indicate
that they have been sent. Replace the stamp cartridge
when the stamp mark is faint or no longer visible.
When replacing the stamp cartridge, take care not
to allow ink to come into contact with your hands or
clothing. If ink gets onto your hands or clothing, wash
it off immediately with cold water.
NOTE
The feeder is an optional product.
Duplex Color Image Reader
Unit-E1
1
Open the feeder.
2
Pull the lever above the feeder, and open
the document scan cover.
IMPORTANT
Open the document scan cover carefully, as not to scratch
the platen glass.
3
Open the stamp cover.
3
4
Remove the old stamp cartridge.
5
Push in the new stamp cartridge until it
clicks.
IMPORTANT
•
Insert the stamp cartridge so that it is not slanted.
•
Insert the stamp cartridge properly, or paper jams may
occur.
6
Close the stamp cover.
When closing the cover, be careful not to get your
fi ngers caught, as this may result in personal injury.
Routine Maintenance
53