Canon JX510P Guia Del Usuario página 11

Selecting the Language for the LCD
If an unintended language is displayed on the LCD, change it into your desired language
following the procedure below.
1
Press [Menu].
2
Press [}] once, then press [Start/Copy].
3
Press [}] five times, then press [Start/Copy].
4
Press [}] twice, then press [Start/Copy].
The currently selected language name is displayed in the language itself.
5
Press [}] once, then press [Start/Copy].
Each time you press [}], the display cycles through:
<ENGLISH>, <GERMAN>, <FRENCH>, <ITALIAN>, <SPANISH>, <DUTCH>,
<PORTUGUESE>, <NORWEGIAN>, <SWEDISH>, <DANISH>, <FINNISH>, <RUSSIAN>,
<CZECH>, <HUNGARIAN>, <POLISH>, <SLOVENE>, and <CHINESE>.
6
If your desired language is displayed, press [Stop/Reset].
Setting ends and the fax returns to standby mode.
If your desired language is not displayed, press [{] once, press [Start/Copy], then repeat
from step 5 again.
8 Introduction