Positioning; Aeroflat Bar Starters; Extensions - Look 796 Monoblade RS Manual De Uso

EN

AEROFLAT BAR starters

The AEROFLAT BAR basebar is reversible, and this allows two starter height positions 50mm
apart. It is possible to shorten the starter lengths by recutting them. (Cf. RECUTTING ADVICE)

Extensions

There are two types of extensions: straight (fig. 25.1) and «S-Bend» (fig. 25.2).
It is generally necessary to recut the extensions to adapt to the rider's position. (Cf. RECUTTING
ADVICE)
You have the option of angular adjustment of the S-Bend to bring together/separate the
extension ends.
Fig. 25.1
Nature de la modification
ECHELLE 1:3
Volume (mm3) Masse (g)
FORMAT A4
Important : Do not use extensions from another manufacturer. With the diameters not
Dessiné par Date
being the same you risk obtaining poor clamping, but also irreversible damage to the clamp
Vérifié par Date
All information contained on this drawing is property of LOOK CYCLE INTERNATIONAL. Its reproduction for any use in any way or for commercial components.
purpose is forbidden. All rights on this material are reserved.
31
Resp
Matière
ENSEMBLE
ACT-001 AEROFLAT BAR
DESIGNATION
Assemblage prolongateur

Positioning

Fig. 25.2
Date Ind.
Traitement
REFERENCE PROTO.
REFERENCE
Volume (mm3) Masse (g)
Dessiné par
Vérifié par
Nature de la modification
Matière
ECHELLE 1:3 ENSEMBLE
FORMAT A4
ACT-001 AEROFLAT BAR
Date
DESIGNATION
Date
Assemblage prolongateur
Resp Date Ind.
Traitement
REFERENCE PROTO.
REFERENCE