Tabla de contenido
Select which settings to
include in the new Preset
o
Presets for the Holder are also available to select. If you wish to enter a new Preset, first make
changes to the Blade Offset and Overcut settings. Then click on the icon
The following window will open:
These are the settings
that will be saved with
this new Preset
o
If you need to delete any of the Presets you added yourself, select the Preset from the menu and
then a delete option will be available for removing that Preset:
Select a Preset you want
to remove from the menu
o
If you select Pen under Holder, then an additonal option called Prompt for pen color change will
appear. Marking this setting will cause the cutter to pause between colors so that the tool can be
changed out, if desired.
o
Detailed instructions on utilizing both heads on the KNK Force are presented in Chapter 12.
Print+Cut: Clicking on this button opens the Print and Cut window. Refer to Chapter 11 for detailed
instructions on calibrating the camera and performing print and cut applications.
Set Origin: Click on this button to set the origin for cutting. The following window will open:
Name the new Preset
Click OK when done
to the right of Holder.
Name the new Preset
Click OK when done
Click here to delete the
Heavy Cardstock preset
Click here to delete the
KNK Fabric Blade preset
229
Tabla de contenido
