Tabla de contenido
Cut Settings tabs:
PRO version
Connection
Settings
Cut Mode
Settings
Cutting/Drawing
Settings
Print and cut mode:
Chapter 11
Cut Settings tabs: The regular version of SCAL will only have the General tab. The PRO version will
have three additional tabs; Cut by Color (refer to Section 10.06.2), Tiles (refer to Section 10.06.3) and
Extras (refer to Section 10.06.4).
Connection Settings: Choose the model of cutter being used and connection settings. For the KNK
Force this includes the Wifi IP address set up under C3.
Enter the same IP
Address used for C3
Cutter Settings, which can also be accessed by going to Cutter>Cutter Settings, opens a new
window with additional settings relevant to that model. For the KNK Force:
Sizing Calibration: Refer
to Section 2.07
Dual Head settings
Refer to Chapter 12
Surface Height: Refer
to Section 13.04.2
o
Jog Distance: The following settings apply when setting the origin or moving the Force camera or
Maxx/Zing laser light:
▪
Normal: the distance the head or mat moves with each arrow key increment
▪
Fast: the distance the head or mat moves while holding Shift with each arrow key increment
Cutter Settings
Set the origin
Execute the cut
Zoom icons for
Preview
Preview
Refer to the next
bullet in this section
Click here to activate a
small movement
Print and Cut
settings: Refer
to Chapter 11
See explanations
below
227
Tabla de contenido
