Maintenance And Cleaning - Bosch GSR 1000 SMART Professional Instrucciones De Servicio

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Temperature Dependent Overload Protection
When using as intended for, the power tool cannot be
subject to overload. When the
load is too high or the allowable battery temperature of
65 °C is exceeded, the electronic control switches off
the power tool until the temperature is in the optimum
temperature range again.
Working Advice
u Apply the power tool to the screw only when it is
switched off. Rotating tool inserts can slip off.
After longer periods of working at low speed, allow the
machine to cool down by running it for approx. 3 minutes at
maximum speed with no load.
For drilling in metal, use only perfectly sharpened HSS drill
bits (HSS=high-speed steel). The appropriate quality is
guaranteed by the Bosch accessories program.
Before screwing larger, longer screws into hard materials, it
is advisable to predrill a pilot hole with the core diameter of
the thread to approx.
/
of the screw length.
2
3

Maintenance and Cleaning

u Before any work on the machine itself (e. g
maintenance, tool change, etc.) as well as during
transport and storage, remove the battery from the
power tool. There is danger of injury when
unintentionally actuating the On/Off switch.
u For safe and proper working, always keep the
machine and ventilation slots clean.
When the battery is no longer operative, please refer to an
authorised after-sales service agent for Bosch power tools.
If the machine should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for Bosch
power tools.
In all correspondence and spare parts order, please always
include the 10-digit article number given on the type plate
of the machine.
Warranty
We guarantee Bosch appliances in accordance with
statutory/country-specific regulations (proof of purchase
by invoice or delivery note).
Damage attributable to normal wear and tear, overload or
improper handling will be excluded from the guarantee.
In case of complaint please send the machine,
undismantled , to your dealer or the Bosch Service Center
for Electric Power Tools.
Warning!
Freight and insurance costs are charged to the client, even
for warranty claims.
After-sales Service and Customer Assistance
Our after-sales service responds to your questions
concerning maintenance and repair of your product as well
as spare parts. Exploded views and information on spare
parts can also be found under:
www.bosch-pt.com
1 600 A00 9CD | 02.15
Manual GSR 1000 SMART.indd 23
Our customer consultants answer your questions concerning
best buy, application and adjustment of products and
accessories.
Transport
The battery is tested according to UN document ST/SG/
AC.10/11/Rev.3 Part III, subsection 38.3.
It has effective protection against internal overpressure
and short circuiting as well as devices for the prevention of
violent rupture and dangerous reverse current flow.
The lithium-equivalent content in the battery is below
applicable limit values. Therefore, the battery is not subject
to national or international regulations pertaining to
dangerous mediums, neither as an individual component
nor when inserted into a machine. However, the
regulations governing dangerous goods may be relevant
when transporting several batteries. In this case, it can
be necessary to comply with special conditions (e.g.,
concerning the packaging). For more information, please
refer to the instruction sheet (in English) under the following
Internet address:
http://purchasing.bosch.com/en/
start/Allgemeines/Download/index.htm.
Disposal
The machine, accessories and packaging should be sorted
for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According the European Guideline
2002/96/EC for Waste Electrical
and Electronic Equipment and its
implementation into national right, power
tools that are no longer usable must be collected separately
and disposed of in an environmentally correct manner.
Battery packs/batteries:
Li-ion:
Please observe the instructions
in section "Transport".
Do not dispose of battery packs/batteries into household
waste, fire or water. Battery packs/batteries should be
collected, recycled or disposed of in an environmental-
friendly manner.
Only for EC countries:
Defective or dead out battery packs/batteries must be
recycled according the guideline 91/157/EEC.
Batteries no longer suitable for use can be directly returned
at:
Subject to change without notice.
23
English |
Bosch Power Tools
19/02/15 10:36
Tabla de contenido
loading

Tabla de contenido