Maintaining The Chain Bar; Waste Disposal And Environmental Protection; Spare.parts - FLORABEST FKS 2200 c2 Traducción Del Manual De Instrucciones Original

. Never.attach.a.new.chain.
to.a.worn.drive.pinion.or.
place.onto.a.damaged.or.
worn.chain.bar..The.chain.
could.spring.back.or.break,.
potentially.leading.to.serious.
injury.

Maintaining the chain bar

. Use.cut-protection.gloves.
when.handling.the.chain.or.
the.chain.bar.
The chain bar must be turned round every
10 working hours, in order to guarantee
uniform wear.
1. Switch off the saw and pull out the
power plug (18).
2. Remove the sprocket chain wheel cov-
ering (15), the saw chain (5) and the
chain bar (4).
3. Check the chain bar (4) for wear. Re-
move burrs and straighten the guide
surfaces with a flat file.
4. Clean the oil passages (
the chain bar, in order to guarantee
a trouble-free, automatic oiling of the
saw chain during operation.
5. Mount chain bar (4), chainsaw (5) and
sprocket chain wheel covering (15)
and tighten the chainsaw.
Turning over the bar (4) requires you to
move the tensioning screw (
other side of the bar. Unscrew the retain-
ing bolt attaching the bar to the tensioning
screw. Move the tensioning screw over to
the other side of the bar and screw the re-
taining bolt back in.
With the oil nozzles in good condi-
tion and the oil regulator set cor-
Waste disposal
and environmental
protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in an
environmentally correct manner - bring it to
a waste disposal center.
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Empty the oil tank carefully and hand in
your electric chainsaw at a disposal center.
The plastic and metal parts employed can
be separated out and thus recycled use
can be implemented. Ask our Service-
Center for details.
25) of
J
Spare parts
The following spares are available from
Service-Center. Please indicate the machine
type and the number of the spare part with
your order.
Saw chain ............................3009 1570
22) to the Chain bar ............................3010 0412
F
Bio chain oil 1 liter ................3023 0001
Bio chain oil 5 liter ................3023 0002
If further spare parts should be necessary,
please find the part number on the explod-
ed drawings.
rectly, the saw chain will spray a
little oil off after starting.
Machines do not belong with do-
mestic waste.
GB MT
95