Specified Use; Scope Of Supply; Device Description - Weller WDH 10T Manual De Uso

4-8 WDH 10T/20T
are not observed. If the switching holder is passed on to third
parties, always hand over the Operating Instructions as well.

2.1 Specified use

Always use the switching holder WDH 10T/20T exclusively for the
purpose specified in these Operating Instructions: for depositing the
soldering tools listed below under the conditions specified in these
instructions. Specified use of the switching holder WDH 10T/20T
also includes
− observance of these Operating Instruction,
− observance of all other accompanying documentation,
− observance of the locally applicable accident prevention
regulations.
The manufacturer shall not be liable for damage resulting from
unauthorised alterations to the machine.

3 Scope of supply

WDH 10T
− Switching holder WDH 10T
− Operating Instructions WDH 10T
WDH 20T
− Switching holder WDH 20T
− Operating Instructions WDH 20T
WSP 80IG Set
− Switching holder WDH 10T
− Soldering iron WSP 80IG
− Operating Instructions WDH 10T

4 Device description

The Weller WDH 10T/20T switching holder, as opposed to a
standard safety rest, provides a switching function that can be
evaluated by the soldering station. A microswitch integrated in the
switching holder is actuated when the soldering tool is deposited or
removed.
When the switching holder is inserted in a digital Weller soldering
station, automatic detection takes place and, depending on the
application, the standard range of functions for temperature
decrease or valve control is extended (only WAD 101).
For securing purposes, several switching holders can be connected
together at the side.