Beper 90.341A Manual De Instrucciones página 13

Hand Mixer Use instructions
USE ADVICE
Before using the hand mixer check his and cord supply integrity ; check that the main
voltage correspond to the one of the hand mixer.
Do not use the hand mixer if the cord supply is damaged or if there are dysfunction.
Make sure the cord supply does not touch sharp or hot surfaces.
Do not pull on the cord supply to unplug the hand mixer from the socket.
For household use only.
Do not use the hand mixer near or onto hot electric oven.
Remove the whisks from the hand mixer before cleaning.
Using non original whisks may cause damages to the appliance.
To protect the motor and make last longer do not use the hand mixer to maximum power for more
than 5 minutes consecutives and make it cool for 5 minutes before use it again.
Do not use the TURBO button for more than 1 minute.
Be careful with the moving parts, especially when the appliance is plugged.
Keep your hands, hair, clothes and utensils away from the whisks when they are moving to prevent
from injuries to people and damages to the hand mixer.
Keep away from children.
Do not immerse the hand mixer into water or other liquids.
Do not use the hand mixer with wet hands or naked feet.
Before inserting the beaters and/or clean the hand mixer unplug the cord supply from the socket.
Before removing ingredients, unplug the cord supply from the socket.
DESCRIPTION
1 – Eject handle
2 – Speed selector
3 – TURBO button
4 – Switch on/off
5 – Ergonomic handle
6 – Motor unit
7 – Cord supply
8 – Whisks
USE INSTRUCTION
Make sure the cord supply (6) is not plugged and the speed selector (2) is on position 0.
Insert the whisks (7) until they are locked into place.
Plug the cord supply (6) into the socket.
Pour the ingredients into the container and start with the hand mixer, putting it at the centre of the
container.
Press on/off to turn on the hand mixer.
Select different speed with the selector (2) and always start with the lower speed 1. It is possible to
accelerate speed using TURBO button (3).
When starting the preparation, make sure to the correct position of the hand mixer into the container,
that could cause splashes. When complete, turn off the hand mixer by pressing on/off (2), and put it
on his back to remove the whisks (7) easily by pressing removing whisks button (1).
13