Reversing The Door Swing; Important; Tools You Will Need - GE GBC12IAX Manual Del Propietario E Instalación

REVERSING THE DOOR SWING

IMPORTANT NOTES
When reversing the door swing:
• Read the instructions all the way through before
starting.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid
using them in the wrong places.
• Provide a non-scratching work surface
for the doors.
IMPORTANT: Once you begin, do not move the
cabinet until door-swing reversal is completed.
These instructions are for changing the hinges from
the right side to the left side—if you ever want to
change the hinges back to the right side, follow
these same instructions and reverse all references to left and right.
Unplug the refrigerator from its electrical outlet.
Empty all door shelves, including the dairy
compartment.

TOOLS YOU WILL NEED

Adjustable Wrench
Masking Tape
Phillips Screwdriver
Installation Instructions
10 mm Socket Ratchet/Driver
Thin-blade Screwdriver
REMOVE THE REFRIGERATOR DOOR
1
Tape the door shut with masking tape.
A
Using a Phillips screwdriver, remove the
B
electronics box cover screws on the flanges
toward the back of the refrigerator.
C Using a Phillips screwdriver, remove the hinge
cover screws. Lift up the front of the electronics
box cover to lift off the hinge cover. DO NOT
remove the electronics box cover. There will be
a wire harness connection to the hinge cover.
Do not disconnect. Place the hinge cover on
the top of the refrigerator, being careful not
to pinch or damage any wires.
Electronics
Box Cover
Screws
Using a Phillips screwdriver, remove the door
D
cap screws. Lift the cap off of the door.
E Using a 10 mm socket ratchet/driver, remove
the hex screws securing the top hinge. Lift
the hinge straight up to free the hinge from
the socket in the top of the fresh food door.
10
Screws
Door Cap
Screw
Hex Screws
Hinge
Cover
Screw