Preparing For The Measurement - Beurer BC 28 Instrucciones De Uso

4. Preparing for the measurement

Inserting the batteries
• Remove the battery compartment lid on the left side of
the device.
• Insert two 1.5 V micro (alkaline type LR03) batteries.
Make sure that the batteries are inserted the correct
way round. Do not use rechargeable batteries.
• Close the battery compartment lid again carefully.
If the battery replacement symbol
you can no longer perform any measurements and must
replace all batteries.
Battery disposal
• The empty, completely flat batteries must be disposed
of through specially designated collection boxes, re-
cycling points or electronics retailers. You are legally
required to dispose of the batteries.
• The codes below are printed on batteries
Setting the hour format, date and time
This menu allows you to set the following functions, one
after another.
It is essential to set the date and time. Otherwise, you will
not be able to save your measured values correctly with a
date and time and access them again later.
Hour format
is displayed,
• Press and hold the START/STOP button
• Select the desired hour format using the
Date
The year flashes on the display.
22
containing harmful substances:
Pb = Battery contains lead,
Cd = Batter contains cadmium,
Hg = Battery contains mercury.
Hour format Date
➔
If you press and hold the memory button M you can
set the values more quickly.
for 5 seconds or insert the batteries. The full
display appears.
memory button M and confirm with the
START/STOP button
Time
➔
.