Setting The Call Tone; Sending A Call Tone; Roger Beep On/Off - Topcom TwinTalker 3800 Manual De Usuario

Topcom Twintalker 3800
14.8 VOX Selection
The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will
transmit a signal when it is activated by your voice or other sound around you. VOX operation
is not recommended if you plan to use your radio in a noisy or windy environment.
SCAN
VOX
DCM
14.9 Call Tones
A call tone alerts others that you want to start talking.

14.9.1 Setting the Call Tone

The Twintalker 3800 has 5 call tones
SCAN
VOX
DCM

14.9.2 Sending a call Tone

Press the button

14.10 Roger Beep On/Off

After the PTT - button
have stopped talking.
SCAN
VOX
DCM
8
• Press the - button
flashes on the display and the VOX icon is displayed.
• Press the -button
-button 11 again to set the VOX sensitivity level between 1
and 3. Press the
to turn VOX OFF.
• Press the - button
mode.
• Press the - button
• Press the - button
another Call Tone. Select 'OF' to disable the call tones.
• Press the - button
mode.
12 briefly. The call tone will be transmitted on the set channel.
is released, the unit will send out a roger beep to confirm that you
10
• Press the - button
setting flashes on the display and 'ro' is displayed.
• Press the - button
disable (OF) the Roger Beep.
• Press the - button
mode.
6
three times, the current VOX setting
11 to turn the VOX feature ON. Press the
button 7 until 'OF' appears on the display,
to confirm and return to stand-by
10
6
four times, 'CA' is displayed.
11 or the - button
to confirm and return to stand-by
10
6
five times, the current Roger Beep
11 to enable (ON) or the
to confirm and return to stand-by
10
7 to change to
- button 7 to
Topcom Twintalker 3800