Technical Data; Warranty; Ec Declaration Of Conformity - GreenWorks G48PHT Manual Del Operario

EN
Problem
The machine
smokes during op-
eration.
The motor is on,
blades do not
move.
Too much noise
and/or vibration is
experienced while
working.
8

TECHNICAL DATA

Voltage
No load speed
Blade speed
Blade length
Cutting capacity
Weight (without battery pack)
Measuered sound pressure level
Guaranteed sound power level
Vibration
Uncertainty
9

WARRANTY

(The full warranty terms and conditions can be found on
Greenworks webpage)
The Greenworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
Possible cause Solution
1. Immediately
stop the ma-
chine.
The machine has
2. Remove the
damage.
battery.
3. Speak to serv-
ice center.
Do not use the ma-
The machine has
chine and speak to
damage.
service center.
Remove battery
The blades are then clear block-
blocked. age from the
blades.
1. Stop the ma-
chine.
2. Remove the
battery.
The parts are loos-
3. Inspect for
en.
damage.
4. Check and
tighten loose
parts.
Do not use the ma-
The parts have
chine and speak to
damage.
service center.
48V
3000
(±10%) /min
3000
(±10%) /min
510 mm
27 mm
3.5 kg
82 dB(A),
K
PA
99 dB(A)
≤2.5 m/s
1.5 m/s
English
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner's manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
10 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
Address:
Name and address of the person authorised to compile the
technical file:
Name:
Address:
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construction:
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2014/30/EU
• 2000/14/EC & 2005/88/EC
• 2011/65/EU & (EU)2015/863
Furthermore, we declare that the following parts, clauses of
=3 dB(A) European harmonised standards have been used:
• EN 60745-1,EN 60745-2-15, EN ISO 10517,EN 55014-1,
EN 55014-2,EN ISO 3744,ISO 11094,IEC 62321-3-1,
2
IEC 62321-4,IEC 62321-5,IEC 62321-6,IEC 62321-7-1,
IEC 62321-7-2,IEC 62321-8
2
Measured sound pow-
er level:
Guaranteed sound
power level:
6
GLOBGRO AB
Globe Group Europe
Propellergatan 1, 211 15 Malmö, Sweden
Peter Söderström
Propellergatan 1, 211 15 Malmö, Sweden
Pole Hedge Trimmer
2300607 (PTE346)
See product rating label
See product rating label
L : 94 dB(A)
WA
L : 99 dB(A)
WA.d