Troubleshooting - EINHELL TC-PG 3500 W Manual De Instrucciones

10. Troubleshooting

Fault
Engine does not
start
Generator has too
little or no
voltage
Anl_TC_PG_3500_W_SPK9.indb 22 Anl_TC_PG_3500_W_SPK9.indb 22
GB
Mögliche Ursache
Automatic oil cut-out has not respon-
ded
Spark plug fouled
No fuel
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air fi lter dirty
- 22 -
Behebung
Check oil level, top up engine oil
Clean or replace spark plug (electro-
de spacing 0.6 mm)
Refuel / have the petrol cock checked
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the fi lter
15.01.2018 10:33:58 15.01.2018 10:33:58