Legal Information; Description Du Produit - Ottobock Liner Instrucciones De Uso

1) Turn the liner inside out.
2) Hand wash the liner in warm water (30 °C) using neutral deter­
gent (e.g. Ottobock 453H10=1 Derma Clean).
3) Thoroughly rinse the liner with clear water until all detergent
residues have been removed.
4) Turn the liner again so the outer side/textile material is on the out­
side.
5) Put a hand towel into the liner and leave the liner to dry lying flat
on a drying rack. Alternatively, use a drying stand (TT: 5Y100=1
TF: 5Y100=2).
NOTICE! Liner with textile cover: To avoid damaging the
liner, dry it with the textile material on the outside.
7 Disposal
This product may not be disposed of with regular domestic waste in
all jurisdictions. Disposal that is not in accordance with the regula­
tions of the country where the product is used may have a detrimental
impact on health and the environment. Please observe the information
provided by the responsible authorities in the country of use regarding
return, collection and disposal procedures.

8 Legal information

All legal conditions are subject to the respective national laws of the
country of use and may vary accordingly.
8.1 Liability
The manufacturer will only assume liability if the product is used in
accordance with the descriptions and instructions provided in this
document. The manufacturer will not assume liability for damage
caused by disregarding the information in this document, particularly
due to improper use or unauthorised modification of the product.
8.2 CE conformity
The product meets the requirements of Regulation (EU) 2017/745on
medical devices. The CE declaration of conformity can be down­
loaded from the manufacturer's website.
8.3 Warranty
The manufacturer warrants this device from the date of fitting. The
warranty covers defects that can be proven to be a direct result of
flaws in the material, production or construction and that are reported
to the manufacturer within the warranty period.
Further information on the warranty terms and conditions can be
obtained from the competent manufacturer distribution company.

1 Description du produit

INFORMATION
Date de la dernière mise à jour : 2020-02-19
► Veuillez lire attentivement l'intégralité de ce document avant
d'utiliser le produit ainsi que respecter les consignes de sécuri­
té.
► Apprenez à l'utilisateur comment utiliser son produit en toute sé­
curité.
► Adressez-vous au fabricant si vous avez des questions concer­
nant le produit ou en cas de problèmes.
► Signalez tout incident grave survenu en rapport avec le produit,
notamment une aggravation de l'état de santé, au fabricant et à
l'autorité compétente de votre pays.
► Conservez ce document.
INFORMATION
► L'appareillage du patient avec le manchon doit commencer au
plus tard à la date imprimée sur le côté intérieur de l'emballage
ou sur l'étiquette (DLUO).
1.1 Fonctionnement
Utilisés avec une solution d'adhérence appropriée, les manchons
augmentent le confort de l'utilisateur et améliorent l'adhérence de la
prothèse. Ensemble, ils réduisent les forces exercées sur le moignon.
Français
11