HQ-Power VDPLP56SL Manual Del Usuario página 5

• Never stand directly below the device when it is being mounted, removed or serviced. Have a qualified
technician check the device once a year and once before you bring it into service.
• Install the device in a location with few passers-by that is inaccessible to unauthorised persons.
• Overhead mounting requires extensive experience: calculating workload limits, determining the
installation material to be used... Have the material and the device itself checked regularly. Do not
attempt to install the device yourself if you lack these qualifications as improper installation may result
in injuries.
• Adjust the desired inclination angle via the mounting bracket and tighten the bracket screws.
• Make sure there is no flammable material within a 0.5 m radius of the device.
• Have a qualified electrician carry out the electric connection.
• Connect the device to the mains with the power plug. Do not connect it to a dimming pack.
• The installation has to be approved by an expert before the device is taken into service.
8. Operating Instructions
Control Panel Navigation
Access the control panel functions using the four panel buttons located directly underneath the LCD
display.
button
<MENU> used to access the menu or to return to a previous menu option
<DOWN> scrolls through the menu options in descending order
<UP> scrolls through the menu options in ascending order
<ENTER> used to select and store the current menu or option within the menu
The control panel LCD display shows the menu items you select from the menu map. When a menu
function is selected, the display will show immediately the first available option for the selected menu
function. To select a menu item, press <ENTER>.
Use the <UP> and <DOWN> buttons to navigate the menu map and menu options. Press <ENTER> to
access the menu function currently displayed or to enable a menu option. To return to the previous
option or menu without changing the value, press the <MENU> button.
Menu Functions
menu sub-menu
p1
p2
p3
p--
p4
p5
p6
3-ch d001-d512
7-ch d001-d512
c1
c2
c3
c-- c4
c5
c6
c7
s-- 5001-5100
r---
u-- g---
b---
23.07.2010
function sub-selection
7-colour
switching
7-colour fading
7-colour
switching
7-colour fading
7-colour sound
control
adjustment
3-colour sound
control
-
-
red
green
blue
cyan
magenta
yellow
white
default range
5050
red
green
blue
VDPLP56SL
function
select between 2 switching and 2 fading
-
use sound
sensitivity
select between 2 sound-active programs
knob [5]
- select 3-channel DMX mode (RGB)
select 7-channel DMX mode (RGB, macros,
- run speed, strobe, automatic/sound,
-
speed range for 2 switching and 2 fading
-
combine red, green and blue to create
000~100
5
description
built-in programs
dimmer)
select between 7 static colours
built-in programs
your own custom colour
©Velleman nv