Standard Accessories - HIKOKI CB 18DBL Instrucciones De Manejo

NAMES OF PARTS (Fig. 1 – Fig. 14)
Housing
1
Motor (built-in)
2
Frame
3
Guide plate
4
Band saw blade
5
Side handle
6
Tension lever
7
LED light
8
Battery
9
Dial for setting band saw blade circumferential speed
0
Remaining battery indicator switch
!
Remaining battery indicator lamp
@
Switch panel
#
Switch lock
$
Hex. bar wrench
%
Blade pulley cover (B)
^
Band saw blade ball bearing supports
&
M5 hexagonal socket head bolts
*
(for securing blade pulley cover)
Blade pulley cover (A)
(
Name plate
)
Handle
q
Switch
w
Latch
e
Pilot lamp
r
Charger
t
Tab
y
Blade pulley
u
Band saw blade back ball bearing support
i
Direction of rotation
o
Workpiece
p
Blade pulley rubber
a
Bearing holder (A)
s
Bearing holder (B)
d
Screw
f
Bearing pin
g
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
CB18DBL: Cordless Band Saw
Read all safety warnings and all instructions.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/
EC on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
Direct current
V Rated voltage
Switching ON
Switching OFF
Disconnect the battery
Tighten band saw blade
Loosen band slaw blade
Number of teeth/inch
Direction of band saw blade rotation
Remaining battery indicator switch
The battery remaining power is nearly empty.
Recharge the battery soonest possible
The battery remaining power is a half.
The battery remaining power is enough.
Prohibited action

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the
accessories listed on page 256.
Standard accessories are subject to change without notice.
APPLICATIONS
○ Cutting various types of soft steel materials including
conduit pipes, stainless steel pipes, lining steel pipes
and steel rods
○ Cutting nonferrous metal materials including power and
communication cables and aluminum window frames
○ Cutting plastic (thermoplastic material cannot be cut as
the band saw blade may become wedged in the material
which is prone to melting when heated by cutting friction
5
English