Names Of Parts And Their Functions - Mitsubishi Electric PAC-YT32PTA Libro De Instrucciones

3. Names of Parts and their Functions

A SET/MONITOR DISPLAY:
When SET is displayed, clock adjustment,
change of day, and daily and weekly timer
settings can be performed. When MONI-
TOR is displayed, all switches except SET/
MONITOR SW are invalidated. This is nor-
mal status.
B WEEKLY TIMER SETTING DISPLAY:
Used to select whether the operation pat-
tern set using the PATTERN SETTING can
be applied to different days of the week.
C CURRENT DAY DISPLAY:
Indicates the current day.
D CURRENT TIME DISPLAY:
During MONITOR status, current time is
display.
During daily timer setting, a time desire
for timer setting is displayed.
E OPERATION MODE DISPLAY:
Indicates the operation mode.
F DAILY TIMER SETTING DISPLAY:
24 hours is divided into 48 blocks and each
block is expressed in 30 minutes.
The block display consists of 3 patterns.
G SET BACK DISPLAY
Indicates the set back value.
A B
I I I I
S M T W
SET
L L L L
M O NIT O R
SET/MONITOR MODE A/B/OFF
WEEKLY SETTING
CLOCK
PAC-YT32PTA
1 2 3
1 SET/MONITOR Button
Using this switch, select "MONITOR" or "SET" Mode.
"MONITOR": Indicates the current timer setting. All switches expect
"SET":
2 MODE A/B/OFF Button
Used for setting timer in day of week unit.
3 CLOCK ADJUSTMENT Button
Used for adjustment of the current time.
4 DAY SETTING Button
Used when setting the day.
5 WEEK DAY SETTING Button
Used for week day setting.
Pushing [
→ T → W → ... enabling to set the week day.
6 SET BACK SETTING Button
Used for set back setting.
Set back can be done in the range of 1, 2, 4, 6 and 8°C (2, 4, 8, 12 and
16°F).
7 ON/OFF/SET BACK Button
Used to specify the time setting pattern.
8 DAILY TIMER Button
Used for timer setting in 30 minute units.
9 MODE A/B Button
Used to set A Mode or B Mode when specifying the operation time.
C D EF
MODE A MODE B
I I I
T F S
L L L 0 3 6 9
12 15 18 21
SET BACK
DAY SET BACK DAILY TIMER MODE A/B
ON/OFF/SET BACK
L
TODAY
DAILY SETTING
45 6 7
MODE SELECTOR SW are invalidated then. This is the
normal status.
Set to "SET" mode for clock adjustment, change of day
and daily and weekly timer settings.
Push [ ] SW to advance the time. Each time the button is pushed
the time advances by 1 minute, pushing continuously advances by
1 minute at 0.5 second intervals, and when the lower digit of the
minute becomes "0" the time advances in 10 minute units.
[ ] SW is used for reversing the time. Each time the button is
pushed the time reverses by 1 minute, pushing continuously re-
verses the time by 1 minute at 0.5 second intervals, and when the
lower digit of the minute becomes "0" the time reverses in 10 minute
units.
] SW moves the week day light display in order of S → M
G
12
24
89
5