Foppapedretti Piuleggero Manual De Instrucciones página 15

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
GB
USE
ADJUSTING THE HOOD (fig.8)
Extend the hood according to requirements to protect baby from the sun.
Note: babies' skin is very delicate. NEVER leave baby under direct sunlight. Always make sure that
the hood has been adjusted correctly.
Open the zip and extend the hood according to requirements to protect baby from the sun.
TURN THE DIRECTION OF THE FRONT WHEELS (fig.9A)
As picture, press the directional part down, then you could turn the direction of the front wheels
freely.
FIX THE DIRECTION OF THE FRONT WHEELS (fig.9B)
As picture, put up the directional part upward.
SAFETY HARNESS (fig.10-11)
Put the brakes on before sitting your child in the stroller.
Releasing the buckle: Press button "A" and pull out the parts.
Place your child in the stroller and adjust the harness to fit him/her (fig.11).
Fastening the buckle: Insert part "a" in part "b", a click will indicate proper fastening.
Always fasten the restraint system properly.
IMPORTANT: If baby is less than 6 months old, the harness belts must be inserted through the lower
slots.
THE BACKREST CAN BE ADJUSTED FREELY (fig.12)
As picture 12A, pull the belt with one hand, hold the backrest adjustment part with the other hand,
then push it airwards, the backrest can be adjusted higher.
Pull the backrest adjustment part outward, then the backrest can be adjusted lower.
Please don't adjuste the backrest when the child is in the stroller.
IMPORTANT: For babies under 6 months of age, the backrest must only be regulated in the fully
reclined, horizontal position at all times.
FOLDING THE STROLLER (fig.13)
Before folding the stroller, ensure that:
• The backrest is adjusted to the vertical position
• The canopy is closed back up
• Move button "a" to the right, as shown in the figure, while pressing button "b" at the same time.
• Fold the handlebar downwards.
• Make sure it is closed properly.
15
Piùleggero
Tabla de contenido
loading

Tabla de contenido