INSTALLATION
RECOMMENDATIONS
Allow air to circulate behind the
refrigerator.
Do not cover te space between the base
and the floorl or top of the refrigerator
with any object. If the refrigerator is
placed underneath a cupboard, leave a
space for air to circulate.
As far as possible avoid locating near to
heat sources.
If the refrigerator needs to be laid down for
unpacking or to change the direction of the
doors, ONLY LAY IT DOWN ON THE REAR
SECTION.
NOTE: The door hinges are on the right. If this is inconvenient
the hinges can be changed to the other side. Instructions are contained in the
section on changing the direction of door opening.
IMPORTANT. Ensure that the refrigerator is
well seated on the ground (without
movement) and is properly levelled (without
tilting) by adjusting the levelling feet.
This refrigerator operates at 220/230 v. If the
voltage in your home is different, a
transformer should be used with an outpout
of not less than 700 W.
Use an EARTHED plug.
NOTE: The manufacturer will not accept any
liability in the event that these
recommendations are not followed.
BEFORE CONNECTING TO THE POWER
1.- Clean the inside of the refrigerator.
2.- Wait for 2 hours before connecting, to ensure proper functioning.
3.- Connect to the power.
2