Product Maintenance - Foppapedretti Eureka Manual De Instrucciones

Disassembly of NEXT i-Size car seat accessory (fig. 83, 84): Grasp the car seat handle and,
pressing release button "A" on one connector, slightly lift up the car seat from the side of the
unhooked connector. Press button "A" on the opposite connector and lift up the accessory using
the handle.

PRODUCT MAINTENANCE

•
This pushchair requires a minimum amount of regular maintenance.
•
The lifetime of the pushchair will be increased if the moving parts are lubricated and it will also
make the opening and folding operations easier.
•
If any of the parts of the pushchair should become stiff or difficult to operate, apply a small
quantity of spray lubricant, for example WD 40. Do not use oil or grease. The WD 40 should not be
used to lubricate the removable wheels. If necessary, the wheels must be removed and cleaned
with a soft, dry cloth.
•
Check the locking mechanisms, the brakes, the wheels, the harnesses, the levers, the seat
regulators, the joints and the securing devices regularly to make sure that they are fastened
correctly and in good operating order.
•
The wheels are subject to wear and should be replaced if necessary.
•
Carry out a careful inspection to check the pushchair is in good operating condition after 18 months
of use, after a long period of storage and before using it for another baby.
•
Clean the fabric with water, neutral detergent and a sponge.
•
Clean the fabric using warm water, a sponge and a neutral detergent.
•
The plastic and metal parts can be cleaned with warm water, a sponge and a neutral detergent.
•
Never use abrasive products for cleaning or ammonia based products, bleach or turpentine.
•
Brush the fabric rather than wash it.
• ENGLISH •
PRODUCT MAINTENANCE
24