Tabla de contenido
Idiomas disponibles
Idiomas disponibles
implant manufacturer before you operate the
product.
•
Do not let a child operate the product. Do not let a
person, without knowledge of the instructions
operate the product.
•
Make sure that you always monitor a person, with
decreased physical capacity or mental capacity, that
uses the product. A responsible adult must be there
at all times.
•
Lock the product in an area that children and not
approved persons cannot access.
•
The product can eject objects and cause injuries.
Obey the safety instructions to decrease the risk of
injury or death.
•
Do not go away from the product when the motor is
on. Stop the motor and make sure that the cutting
attachment does not turn.
•
The operator of the product is responsible if an
accident occurs.
•
Make sure that parts are not damaged before you
use the product.
•
Make sure that you are at a minimum 15 m (50 ft)
away from other persons or animals before you use
the product. Make sure that a person in adjacent
area knows that you will use the product.
•
Refer to national or local laws. They can prevent or
decrease the operation of the product in some
conditions.
Safety instructions for operation
•
Make sure the product is fully assembled before you
use it.
•
The product can cause objects to eject, which can
cause damage to the eyes. Always use an approved
eye protection when you operate the product.
•
Be careful, a child can come near the product
without your knowledge during operation.
•
Do not operate the product if there are persons in
the work area. Stop the product if a person goes into
the work area.
•
Make sure that you are always in control of the
product.
•
Do not use the product if you cannot receive aid if an
accident occurs. Always make sure others know
when you use the product before you start operation.
•
Do not turn with the product before you make sure
that no persons or animals are in the safety area.
•
Remove all unwanted materials from the work area
before you start. If the cutting attachment hits an
object, the object can eject and cause injury or
damage. Unwanted material can wind around the
cutting attachment and cause damage.
•
Do not use the product in bad weather, such as fog,
rain, strong winds, risk of lightning or other
conditions. Dangerous conditions, such as slippery
surfaces, can occur because of bad weather.
•
Make sure that you can move freely and work in a
stable position.
6
•
Make sure that you cannot fall when you use the
product. Do not tilt when you operate the product.
•
Always hold the product with your two hands. Hold
the product on the right side of your body.
•
Operate the product with the cutting attachment
below your waist.
•
Stop the motor before you move the product.
•
Do not put down the product with the motor on.
•
Before you remove the unwanted materials from the
product, stop the motor and wait until the cutting
attachment stops. Let the cutting attachment stop
before you or an aide remove the cut material.
Personal protective equipment
•
Always use correct personal protective equipment
when you operate the product. The personal
protective equipment does not erase the risk of
injury. The personal protective equipment decreases
the grade of injury if an accident occurs.
•
Always use an approved eye protection while you
operate the product.
•
Do not operate the product with bare feet or with
open shoes. Always use heavy-duty slip-resistant
boots.
•
Use heavy, long pants.
•
If it is necessary, use approved protective gloves.
•
Use a helmet if it is possible that objects fall on your
head.
•
Always use approved ear protection while you
operate the product. Noise for a long period can
cause noise-induced hearing loss.
•
Make sure that you have a first aid kit near.
Protective devices on the product
•
Make sure that you regularly do the maintenance to
the product.
•
The life of the product increases.
•
The risk of accidents decreases.
Let an approved dealer or an approved service
center regularly examine the product to do
adjustments or repairs.
•
Do not use a product with damaged protective
equipment. If the product is damaged, speak to an
approved service center.
Cutting attachment guard
The cutting attachment guard prevents a loose object to
eject in the direction of the operator.
Examine the cutting attachment guard for damage and
replace if it is damaged. Only use the approved guard
for the cutting attachment.
Cutting attachment
•
Do the regular maintenance. Let an approved
service center regularly examine the cutting
attachment to do adjustments or repairs.
366 - 002 - 20.11.2017
Capítulos
Tabla de contenido
Solución de problemas
