Warranty; Disposal - Waeco SinePower MSI912 Instrucciones De Montaje

SinePower
LED display
Constantly lit
13

Warranty

The statutory warranty period applies. If the product is defective, please
contact the manufacturer's branch in your country (see the back of the
instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
14

Disposal

➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
If you wish to finally dispose of the product, ask your local recycling
M
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
EN
Cause
Short circuit or reversed
polarity
Excessive load
Remedy
Switch off the inverter and remove
the consumer.
Then switch the inverter back on
without the consumer. If no exces-
sive load is now shown, then there is
a short circuit in the consumer or the
total load was higher than the power
specified on the data sheet.
MSI1812T and MSI1824T: The fuse
in the device must be pressed in
again by hand after it is triggered.
Check the cables and connections.
Warranty
57