IMER MASONRY 750 Manual De Uso página 13

Dear Customer,
Congratulations on your choice of purchase: this IMER saw, the result of
latest technical innovations.
This OPERATION AND MAINTENANCE manual must be kept on site
by the person in charge, e.g. the SITE FOREMAN, and must always be
available for consultation.
This manual is to be considered an integral part of the machine, and
it must be preserved for future reference (EN 12100) throughout the
machine's normal working life. In the case of damage or loss it will be
possible to ask the manufacturer for another copy.
The manual contains important information regarding site preparation,
installation, machine use, maintenance procedures and requests for
spare parts. In any case, adequate experience and knowledge of the
machine is essential for maintenance personnel and the user.
To guarantee complete safety of the operator, safe operation and long
life of equipment, follow the instructions in this manual carefully, and
observe all safety standards currently in force for the prevention of
accidents at work. Use personal protection (safety footwear, suitable
clothing, gloves, goggles, etc.).
IMER INTERNATIONAL declines any liability in the event of failure to
adhere to the laws ruling the use of these devices, in particular: impro-
per use, powering errors, lack of maintenance, unauthorised alterations,
partial or total failure to adhere to the instructions contained herein.
IMER INTERNATIONAL reserves the right to change the features of
the sawing machine and/or the contents of this manual, without being
obliged to update the machine and/or previous manuals.
2.
Table 1 - TECHNICAL DATA
Model
Blade diameter
Blade mounting hole
Blade rpm (230V/50Hz)
Blade rpm (380V/50-60Hz)
Blade rotation direction
Motor rating 230V/50Hz
Motor rating 380V/50-60Hz
Cutting table dimension
Overall dimensions
(width x length x height)
Overall dimensions for transport
(width x length x height)
Sawing machine operating weight
Weight for transport
Table 2
Feature Motor (230V/50Hz)
Power (kW)
Rated voltage (V)
Frequency (Hz)
Absorbed current (A)
rpm
Service type
Insulation category
Protection category
Capacitor (µF)
IMER INTERNATIONAL S.p.A.
MASONRY 750
Masonry 750
750 mm
25,4 mm
1010 rpm
1430 rpm
clockwise
2.2 kW
5.5 kW
490x660 mm
850x1550x1600 mm
850x1550x1600 mm
285 Kg
202 Kg
Motor (380V/50-60Hz)
2.2 5.5
230 380
50 50
13.3 12.8
1440 1430
S1 S1
F F
IP55 IP55
2 x 50
The MASONRY 750 sawing machine has been designed and manufac-
tured applying the following harmonised standards: EN 12418; EN ISO
12100 EN 60204-1
Table 3 shows the sound pressure level measured loadless at the ope-
rator's ear (L ) and of the vibrations transmitted during operation.
-
PA
Model Type of motor
Masonry 750
This saw model has been specially designed for cutting stone, ceramics,
marble, granite, concrete and similar materials. Only water-cooled dia-
mond blades with continuous or segmented edges must be used. Under
no circumstances must dry cutting blades be used or materials other
sponsibility for damage caused by improper use of the above machine.
(max. 40 kg)
wheels with the brake before starting cutting operations.
case, workpieces must not overhang the worktable.
cooling water contaminated with cutting dust.
IMER saws are designed for work on construction sites and under con-
ditions of natural light, hence the workplace must be adequately lit (min
500 lux).
The IMER sawing machine meets Std. EN 60204-1 and in particular is
13
Table 3
L A
pA
Electric 95 dB 2.33 m/s
GB
eq
2
-
-
-