Cleaning And Maintenance - Beurer HA 80 Instrucciones De Uso

To find out where to obtain a new drying capsule, see section "9. Accessories and replace-
ment parts".
Note: To ensure the best possible drying performance, close the lid of the storage box with
charging function after placing the hearing amplifiers inside.

8. Cleaning and maintenance

IMPORTANT
• Always keep the hearing amplifier clean.
• Always treat the products with care and prevent the earplug and microphone from becoming
blocked with foreign matter. This impairs the function of the sound amplification.
• Clean the hearing amplifiers and earplugs with a clean, dry cloth after each use. If they are
very dirty, you can also moisten the cloth with a mild soapy solution. Never use abrasive,
corrosive or solvent-based cleaning products.
• Under no circumstances should you hold the hearing amplifier under water, as this can
cause liquid to enter and damage the hearing amplifier.
• The supplied cleaning brush is suitable for removing earwax stuck in the earplug (see device
description).
• Allow the hearing amplifier to dry fully after cleaning. Store the hearing amplifiers in a safe,
dry and clean place, in the relevant storage box with charging function and with the drying
capsule.
• The drying capsule must be replaced if the colour of the granulate changes from orange to
white (you can find out where to obtain a new drying capsule in section "9. Accessories and
replacement parts").
40