Parts Identification - Sony WRT-808A Manual De Instrucciones

Parts Identification

1 Microphone
connector
Microphone
release button
(under side of
the unit)
2
POWER switch
1 Microphone connector
Connect to a dynamic microphone which has a XLR type
connector.
2 POWER switch
Turns the power of the transmitter ON or OFF.
3 POWER/BATT indicator
When turning on the unit, the POWER/BATT indicator
lights in green. While in operation, the LED indicates the
battery condition.
See "Power Supply" on page 8.
4 AF (audio frequency) /PEAK indicator
The AF/PEAK indicator lights in green when the supplied
3
POWER/BATT indicator
4
AF/PEAK indicator
5
Input LEVEL control
6
Channel select
switches
Battery compartment
audio frequency level is over the reference level. It lights in
red when the signal reaches the maximum level.
5 Input LEVEL control
Controls the input attenuation level.
"–60" position provides 0 dB attenuation, and "–10"
position provides 50 dB attenuation.
6 Channel select switches
Select the transmitting channel.
See "Channel Setting" on page 9.
7 RF power output switch
In normal use, set the switch to "50".
See "Use of RF power output switch" on page 11.
7
RF power
output switch
US
7