Clatronic CDP 7001 Instrucciones De Servicio página 55

1. Open the CD-compartment by pressing the button.
2. Insert an audio CD with the printed side facing upwards on to the central cone so
that the CD clicks into place. Then close the lid of the CD compartment.
3. Press the button to switch the device on and play back the CD.
- When playing audio CDs: The letters "CD" appear in the display and "ESP"
flashes. Then the number of tracks appears briefly together with the total running
time.
- When playing MP3 CDs: The display shows "MP3" and "ESP" flashes until the
buffer memory is full. After that, the number of folders and tracks are shown briefly.
The CD starts from the first track. The track currently being played and the time that
has elapsed are shown in the display.
4. To remove a CD, press the button, open the CD deck with the button and take
out the CD carefully.
Always keep the CD deck cover closed.
NOTE:
• If there is no CD, or if a CD has been inserted upside down, the display will show
" ".
• Playback of CDs produced by the user cannot be guaranteed due to the large
variety of software and CD media available.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in MP3 format. The device
also supports all standard CD types: CD, CD-RW, CD-R.
This device of is able to play MP3 CDs. Up to 200 tracks can be compressed and
stored on these CDs. Your machine detects an MP3 CD automatically (the total num-
ber of tracks and MP3s appears in the display). If you would like to play one of these
CDs, proceed as described under "Playing CDs / MP3".
Please note:
There are a number of different recording and compression methods, as well as quality
differences between CDs and self-recorded CDs.
Furthermore, the music industry does not adhere to fixed standards (copy protection).
For these reasons it is possible that in rare cases there are problems with the playback
of CDs and MP3 CDs. This is not a malfunction of the device.
CDP7001_IM_new
Playing CDs / MP3
55
25.04.17