Programmed Play - Clatronic CDP 7001 Instrucciones De Servicio

Press four times = "RND": The word "RND" flashes in the display. All tracks are
played back in random order.
Press five times = "INTRO": The word "INTRO" flashes in the display. All tracks are
played for ten seconds.
Press six times = All the functions are reset. The normal play mode is resumed.
P (4)
• In stop mode for programming any order of tracks (see the section on "Programmed
Play").
• With the MP3 CD running:
Keep this button pressed to skip to the next folder. (If there are folders on the CD.)
1. Press the button.
2. Press the P button.
3. "001" (the track number) and "PROG" flashes on the display. Next to it you can see
the memory preset number "P-01".
4. Use the / buttons to select the desired track and then press the P button
again. The display changes to memory slot "P-02".
5. Select the next track with the
Repeat the procedure until all the desired tracks are selected. Press the
The playback starts.
The device stops automatically once the entire sequence of programmed tracks is
completed. The abbreviation "PROG" goes off and the programmed order of tracks is
deleted from the memory.
It is possible to combine the pre-programmed tracks with the MODE function.
After you have programmed the tracks and started the machine, please press the
M button up to three times so that the functions "REP 1" and "REP ALL" can be used
as described in the section entitled "M (3)".
Deleting a programmed sequence
To delete the programmed sequence, press the button.
CDP7001_IM_new

Programmed Play

buttons and press the P button again.
/
button.
57
25.04.17