Tabla de contenido
GENERAL CONSIDERATIONS
- For your column to function correctly, the water
supply pressure must not be higher than 5 bar or
lower than 2 bar. For safety reasons, however, it
must not exceed 55ºC. Always respect these limits.
If the pressure or temperature of the water is higher,
the column could be damaged. On the other hand, if
the pressure of the water is lower, your column may
not function correctly.
- The thermostatic tap regulates the temperature by
activating the thermostatic cartridge. If the boiler
switches off too often and cold water comes out
when using any of the functions of the column, clean
the filters of the thermostatic taps and, if the problem
persists, reduce the temperature of hot water
coming from the boiler or heater with the appropriate
control on the device. In all cases, consult the
technical characteristics of the boiler.
HYDROMASSAGE
Before a hydromassage: if you have not used a
certain function of your hydromassage for some
time, the anti-limescale injectors should be checked
as indicated in the hydromassage maintenance
instructions.
Pressure of the water jet: Regulate the water flow
for a more or less powerful massage. Combinations
of the type and duration of massage and the
temperature of the water enable you to adapt the
hydromassage to your requirements.
In general, the intensity of the water jet has the
following effects:
-Greater intensity: toning effects.
-Less intensity: relaxing effects.
The hydromassage should never be excessively
strong.
STAFF
Temperature of the water: we recommend that this
be between 30 ºC y 39 ºC:
Hydromassage:
-Cold (30 - 35ºC). With mainly toning effects.
-Neutral (36 - 37ºC). For relaxing effects.
-Hot (38 - 39ºC). For muscular applications.
Thermostatic tap:
You can select the desired
temperature by means of the "temperature indicator
control". Turn the on-off control until you reach the
desired water flow rate. The water will be at the
temperature you have selected.
On the "temperature indicator control", there is a
safety button that prevents temperatures over 38ºC
being selected by mistake.
temperature, press the button to unblock this safety
mechanism.
Hydromassage process:
Select the desired function using the function selector,
which permits the following options:
•Spray massage (fixed shower). For general use
•Massage with the hand-shower. Adapting its
possible functions to specific parts of the body.
•Body massage with the upper vertical jets. For
application over a wide area of theupper body.
•Body massage with the lower vertical jets. For
application over a wide area of the lower body.
Adjust the temperature of the water, checking it at the
foot-level outlet.
Select the appropriate function.
Turn the water on progressively until you obtain the
most appropriate hydromassage pressure.
If you want a higher
Tabla de contenido
