Vogt HAMMER VH10 Manual De Instrucciones Original página 31

Tool
Conical holder
Conical adapter
Conical
extension
Tool
Plug chisel
Tamper foot
Cleaning pin
Heat protection
tube
For further tools for industrial use please turn to page 66, 68
All Tamper foot, Cleaning pin and Pipe scraper will be delivered with Conical holder KH 140 or KH 140.18
* Over the standard size used Conical holder or Conical extension advance the lever arm and
increase the risk of breakage on tool and equipment - Reduce leverage force. Also the power of impact is
reduced.
Contact:
+49(0)92 78-774 33-0
+49(0)92 78-774 33-11
www.vogt-tec.de
Conical supplies
Application example
short version for special duties
standard for Digging spade, Bush hammer
standard for Compacting plate
long version for special duties
long version for special duties
long version for special duties
connection joint between Conical holder
and Spade or Conical extension
for works which must be done with a safety
zone, the Conical extension is placed
between Conical holder and Spade
Industry
Application example
packing up of ballast
cleaning cooling pipes in
combustors
breaking through openings
machine protection until
650° C or 1150° C
Couldn't find the right tool?
Further tools and custom-made tools on request!
14
l/b [mm]
l = 95
KH 95 KH 95.18
l = 140
KH 140 KH 140.18
l = 200
KH 200 KH 200.18
l = 300 KH 300 KH 300.18
l = 400 KH 400 KH 400.18
l = 500
KH 500 KH 500.18
905 001
l = 600
KV 600
l = 800
KV 800
l = 1000 KV 1000
14
l/b [mm]
l =340 M808.18
---
b = 80
l = 570
VI 1470 H VI 1470.18 H
b = 60
l = 770
VI 1770 H VI 1770.18 H
b = 60
l = 250
VI 30xx H VI 30xx.18 H
Ø 6, 8, 10
l = 250
VI 30xx H VI 30xx.18 H
Ø 12, 14, 16
l = 250 VI 30xx H VI 30xx.18 H
Ø 18, 20, 28
Price on request,
according to machine length
Subject to change without notice
EN
18
18
31