TBH GL 400 Manual De Operaciones página 19

4.Initial operation, set-up and electrical
connextion
This is a protection class 1 product and needs a connection to safety
ground (PE). For connection to the mains supply, please use only the
attached original line cord or one which is identical in design.
Filter system is supplied ready to plug in.
Connect absorption elements or other accessories
●
Connect filter system with the mains supply.
●
Turn the power switch on
●
5.Operating elements / controls
Netz / Power
Ein / On
1
Aus / Off
2
Betriebsstunden
Operating Hours
Pos.1: unit switch
Pos.2: real time hour counter
Pos.3: filter display
greenLED = Filter ok
●
1.yellow LED = 30% filter saturation
●
2.yellow LED = 75% filter saturation
●
red LED
●
At 100% the unit for safety reasons
●
automatically is switched off!
GL400-rev. 2.00
Filter
Anzeige / Monitor
Change
Wechseln
Prüfen Check
Ok
Ok
3
= 100% filter saturation
Start / Stop
Ein / Aus
4
On / Off
Stand By
Run Blinkend
Flashing
5
Pos.4: Stand-By knob
Pos.5: Stand-By display
Pos.6: speed adjustment
Pos.7: malfunction display (temperature
too high / Turbine does not rotate)
-19-
Technical changes reserved / Sous réserve de modifications techniques
Cambios técnicos reservados / Con riserva di modifiche tecniche
Motor
6
Drehzahlregler
Speedregulator
Störung / Failure
Temp.
Turbine
7
Technische Änderungen vorbehalten