Pentair Intellibrite 5G Guia De Instalacion página 10

underwater light. This screw mounts and electrically grounds the housing
securely to the mounting ring and wet niche. Failure to use the screw
provided could create an electrical hazard which could result in death or
serious injury to pool users, installers or others due to electrical shock.
11. Final check for proper IntelliBrite light operation: Switch on
the main switch or circuit breaker to the system, and the switch
that operates the IntelliBrite underwater light itself. The light should
illuminate when power is applied. If not recheck the installation steps
starting with Step 1.
ten (10) seconds unless it is totally submerged in water. Without total
submersion, the light assembly will get extremely hot, which may result in
serious burns or in breakage of the lens. This may result in serious injury
to pool users, installers bystanders, or damage to property.
Use only the special pilot screw provided with this
Never operate this underwater light for more than
10 10