Icon Explanations; Controller Operation - Mitsubishi Electric PAR-40MAAU Libro De Instrucciones

Icon explanations

Controller operation

Timer
The administrator or maintenance user password must be entered
P
on the password input screen to change settings. There is no
settings that can skip this process.
F1 F2
Indicates settings that can
be changed only while the
ON
units are in operation.
Indicates settings that can
be changed only while the
units are operated in the
Cool, Heat, or Auto mode.
: Press to move the cursor left.
F1
: Press to move the cursor right.
F2
: Press to decrease the value by 1.
F3
F4 : Press to increase the value by 1.
* Changes cannot be made unless the
correct password is entered.
F3 F4
OFF
The table below
P
summarizes the square
icons used in this manual.
Indicates settings that can be changed
only while the units are not in operation.
Indicates functions that are not available
when the buttons are locked or the
system is centrally controlled.
Main
Indicates
settings that
can be
made only
from the
main remote
controller.
13