Safety - Power Probe BASIC Manual De Instrucciones

Power Probe Basic
To avoid possible electric shock or personal injury and to
avoid damage to this unit, please use the Power Probe Basic
according to the following safety procedures. Power Probe
recommends reading this manual before using the Power
Probe Basic.
The Power Probe BASIC is strictly designed for automotive
electrical systems. It is to be used on 6 to 12 volt DC only.
The power switch should not be pressed when connected to
electronic control modules, sensors or any sensitive electronic
components. DO NOT connect the Power Probe to AC house
electrical such as 115 Volts.
Do not connect to electrical system with higher than rated volt-
age specified in this manual.
Do not test voltage exceeding the rated voltage on the Power
Probe Basic.
Check the PP Basic for cracks or damage. Damage to the case
can leak high voltage causing a potential electrocution risk.
Check the PP Basic for any insulation damage or bare wires. If
damaged, do not use the tool, please contact Power Probe
Technical support.
Use only shrouded leads and accessories authorized by Power
Probe to minimize exposed conductive electrical connections to
eliminate shock hazard.
Do not attempt to open the PP Basic, no serviceable parts are
inside. Opening this unit voids the warranty. All repairs should only
be performed by authorized Power Probe service centers.
When maintaining the Power Probe, use only replacement parts
certified by the manufacturer.
Use only in well ventilated areas. Do not operate around flamma-
ble materials, vapor or dust.
Be careful when energizing components that have moving parts,
assemblies containing motors or high powered solenoids.
Power Probe, Inc. shall not be liable for damage to vehicles or
components cause by misuse, tampering or accident.
Power Probe, Inc. shall not be liable for any harm caused by
accidents, intentional misuse of our products or tools.
If you have any questions, please go to our website at:
www.powerprobe.com or contact our Technical Support at:
800-655-3585.
www.powerprobe.com

SAFETY

Caution - Please Read
• 800-655-3585
4