Testing Trailer Lights And Connections - Power Probe BASIC Manual De Instrucciones

Power Probe Basic

TESTING TRAILER LIGHTS AND CONNECTIONS

1. Connect the Power Probe Basic to a good battery.
2. Clip the auxiliary ground clip to the trailer ground.
3. Probe the contacts at the jack and apply voltage to them. This lets
you check the function and location of the trailer lights. If the circuit
breaker tripped, it'll automatically reset after it cools.
• Identify which terminal illuminates specific lights
• Finds shorted wires
• Shows open or broken wires
BREAKER TRIP RESPONSE SPECIFICATIONS
8 Amps = No Trip
10 Amps = 20 sec.
15 Amps = 6 sec.
25 Amps = 2 sec.
Short Circuit = 0.3 sec.
www.powerprobe.com
BATTERY
• 800-655-3585
10