Name Plate; Daily Checks; Tyres And Mounting; Maintenance And Care - Quickie HeliX2 Manual De Usuario

Name Plate

NAMEPLATES
The nameplate is located on either the cross-tube assembly or the
transverse frame tube, as well as on a label in the owner's manual.
The nameplate indicates the exact model designation and other
technical specifications. Please provide the following pieces of
information whenever you have to order replacement parts or to file
a claim:
SAMPLE
HeliX
2
Product Name/SKU Number.
Maximum safe slope with anti-tips fitted,
Depends on wheelchair setting, posture and
physical capabilities of the user.
Seat width.
Depth (maximum).
Load Maximum.
CE Mark
User's Guide.
Crash Tested
Date of manufacture.
Serial number.
Due to our policy of continuous improvement in the design of our
wheelchairs, product specifications may vary slightly from the
examples illustrated. All weight/dimensions and performance data
are approximate and provided solely for guidance.
Sunrise Medical complies with the EU Medical Devices Directive
93/42/EEC
All wheelchairs must be used in accordance with the
manufacturer's guidelines.
Sunrise Medical Poland
Sp. z o.o.ul. Elektronowa 6,
94-103 Łódź
Polska
Telefon: + 48 42 275 83 38
Fax: + 48 42 209 35 23
E-mail:
[email protected]
Sunrise-Medical.pl

Daily Checks

CAUTION!
As the user, you are the first person to notice any possible
defects. We therefore recommend that before each use,
you check the items in the following list:
• Check for correct tyre pressures
• Check that the brakes work correctly
• Check that all removable parts are secure, e.g.
armrest, footrest, quick-release axle etc.
• Check for visible damage e.g. on the frame, backrest,
seat sling and back sling, wheels, footplate etc
• If there is any damage or malfunction, please contact your
authorised dealer.

Tyres and Mounting

TYRES AND MOUNTING
Solid tyres are fitted as standard from the factory.
If pneumatic tyres are used, make sure that you maintain the
correct tyre pressure, as this can have an effect on wheelchair
performance. If the tyre pressure is too low, rolling resistance will
increase, requiring more effort to move the chair forward. Low tyre
pressure also has a negative impact on manoeuvrability. If the tyre
pressure is too high, the tyre could burst. The correct pressure for
a given tyre is printed on the surface of the tyre itself, (min 3.5 bar).
Tyres can be mounted the same way as an ordinary bicycle tyre.
Before installing a new inner tube, you should always make sure
that the base of the rim and the interior of the tyre are free of
foreign objects. Check the pressure after mounting or repairing a
tyre. It is critical to your safety and to the wheelchair's performance
that regulation air pressure be maintained and that tyres be in good
condition.

Maintenance and Care

MAINTENANCE
• Check the tyre pressure every 4 weeks. Check all tyres for wear
and damage.
• Check the brakes approximately every 4 weeks to make sure that
they are working properly
and are easy to use.
• Change tyres as you would an ordinary bicycle tyre.
• All of the joints that are critical to using your wheelchair safely are
self-locking nuts. Please
check every three months to make sure that all bolts are secure
(see the section on torque).
• Safety nuts should only be used once and should be replaced
after use.
• Please use only mild household cleansers when your wheelchair
is dirty. Use only soap and
• water when cleaning the seat upholstery and lap belt.
• If your wheelchair should ever get wet, please dry it after use, to
avoid rust and salt corrosion.
• A small amount of sewing-machine oil should be applied to quick
release axles approximately every 8 weeks. Depending on the
frequency and type of use, we recommend taking your wheelchair
to your authorised dealer every 6 months to have it inspected by
trained personnel.
CAUTION!
Sand and sea water (or salt in the winter) can damage the bearings
of the front and rear wheels. Clean the wheelchair thoroughly after
exposure.
The following parts can be removed and sent to the manufacturer /
dealer for repair:
Rear wheels, Armrest, Hanger, Anti – tips. These components are
available as spares. More details can be found in the parts manual.
HeliX 21
2