Switch Trigger; Tools Needed - Ryobi TS1143L Manual Del Operador

FEATURES
SELF-RETRACTING LOWER BLADE GUARD
SWITCH
SPINDLE
TRIGGER
The lower blade guard is made of shock-resistant, see-
LOCK BUTTON
through plastic that provides protection from each side of
the blade. It retracts over the upper blade guard as the saw
is lowered into the workpiece.
SPINDLE LOCK BUTTON
The spindle lock button locks the spindle stopping the
blade from rotating. Depress and hold the lock button while
installing, changing, or removing blade.

SWITCH TRIGGER

The saw will not start until you depress the switch lock with
your thumb then squeeze the switch trigger. To prevent
unauthorized use of the compound miter saw, disconnect it
from the power supply and lock the switch in the off position.
To lock the switch, install a padlock (not included) through
the hole in the switch trigger. A lock with a long shackle of
Fig. 4
5/16 in. diameter may be used. When the lock is installed
and locked, the switch is inoperable. Store the padlock key
in another location.
SWITCH
TRIGGER
PADLOCK
Fig. 5

TOOLS NEEDED

The following tool (not included) is needed for making adjustments or installing the blade:
SQUARE
COMBINATION SQUARE
Fig. 6
10