Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SPECIFIC SAFETY RULES
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to sander safety rules. If you use this tool unsafely
or incorrectly, you can suffer serious personal
injury.
1.
Accessories must be rated for at least the
speed recommended on the tool warning label.
Wheels and other accessories running over rated
speed can fly apart and cause injury. Maximum
operating speed of accessories should be higher
than the highest no load speed marked on the
tool's nameplate.
2.
Hold tool by insulated gripping surfaces when
performing an operation where the cutting tool
may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
3.
Always
use safety glasses or goggles.
Ordinary eye or sun glasses are NOT safety
glasses.
4.
Use only flanges specified for this tool.
5.
NEVER use tool with wood cutting blades or
other sawblades. Such blades when used on a
sander frequently kick and cause loss of
control leading to personal injury.
6.
Hold the tool firmly.
7.
Keep hands away from rotating parts.
8.
Be careful not to damage the spindle, the
flange (especially the installing surface) or the
lock nut. Damage to these parts could result in
wheel breakage.
9.
Make sure the abrasive disc or the wheel is not
contacting the workpiece before the switch is
turned on.
10. Watch out for flying sparks. Hold the tool so
that sparks fly away from you and other
persons or flammable materials.
11.
Do not leave the tool running. Operate the tool
only when hand-held.
12. Do not touch the workpiece immediately after
operation; it may be extremely hot and could
burn your skin.
13. Ventilate your work area adequately when you
perform sanding operations.
14. ALWAYS wear proper apparel including long
sleeve shirts, leather gloves and shop aprons
to
protect
skin
grindings.
15. Use of this tool to grind or sand some
products, paints and wood could expose user
to dust containing hazardous substances. Use
USB038-6
from
contact
with
appropriate respiratory protection.
IF USED AS A GRINDER
16. Always use proper guard with grinding wheel.
A guard protects operator from broken wheel
fragments.
17. When using depressed center grinding wheels,
be sure to use only fiberglass-reinforced
wheels.
18. Check the wheel carefully for cracks or
damage before operation. Replace cracked or
damaged wheel immediately. Run the tool
(with guard) at no load for about a minute,
holding tool away from others. If wheel is
flawed, it will likely separate during this test.
19. Before using the tool on an actual workpiece,
let it run for a while. Watch for vibration or
wobbling that could indicate poor installation
or a poorly balanced wheel.
20. Use the specified surface of the wheel to
perform the grinding.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
Symbols
The followings show the symbols used for tool.
･
･
･
･
･
FUNCTIONAL DESCRIPTION
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function on
the tool.
hot
4
volts
amperes
alternating or direct current
no load speed
revolutions or reciprocation per minute
USD191-2
Tabla de contenido
