Optional Accessories - Makita DCL184 Manual De Instrucciones

Ocultar thumbs Ver también para DCL184:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
Cleaning
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening, dust bag/paper filter
mounting area and the dust stopper.
► Fig.34
Wash the dust bag in soapy water when it is clogged with
dust and the cleaner power becomes weak. Dry it out thor-
oughly before use. An insufficiently dried filter may cause
poor suction and shorten the service life of the motor.
► Fig.35
NOTE: Paper filter is a throw-away type.
When the sponge filter is clogged with dust, remove it
from the cleaner and then wipe it off or wash in water.
Removing and installing the sponge filter
CAUTION:
After cleaning sponge filter, be
sure to install it on the cleaner. If washed in water,
dry it up before installing. An insufficiently dried
sponge filter may shorten the service life of the motor.
To remove the sponge filter, remove the dust bag or
paper filter and then pinch and take it out.
► Fig.36: 1. Sponge filter
Press in the whole edge of the sponge filter against the
recessed wall inside the dust bag/paper filter mounting area.
► Fig.37: 1. Recessed wall
Troubleshooting
Before asking for repairs, check the following points.
Symptom
Weak suction power
Not working
Dust case cover does not close
NOTICE:
Do not attempt to repair cleaner by yourself.

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments
are recommended for use with your Makita tool spec-
ified in this manual. The use of any other accessories
or attachments might present a risk of injury to persons.
Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Extension wand (Straight pipe)
Nozzle
Nozzle for carpet
Shelf brush
Corner nozzle
Storage
and charger in a car. The temperature inside a car
sitting in the sun may exceed 50 °C (122 °F). It may
cause the battery cartridge deteriorated and result in
liquid ejection, smoke emission or a fire.
► Fig.38
ing it in the storage bag. Blocking the air vent may
result in smoking emission or a fire.
► Fig.39
with on-vehicle inverter. It may cause abnormal
heat and result in a fire.
in a car. If the battery cartridge is exposed to the tem-
perature range out of 10°C (50 °F) - 40°C (104 °F), it
may generate heat and/or fire or explode.
trated to avoid tripping, when the cleaner is not
used. Unfolded hose may catch your foot and cause
personal injury.
► Fig.40: 1. Hook 2. Hose
Area to be investigated
Is dust bag or paper filter full of dust ?
Is dust bag clogged ?
Is paper filter clogged ?
Is the battery cartridge exhausted ?
Is the battery cartridge exhausted ?
Is dust bag or paper filter set ?
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
14 ENGLISH
WARNING:
Never leave the battery cartridge
WARNING:
Never use the charger while stor-
WARNING:
Never charge the battery cartridge
WARNING:
Never charge the battery cartridge
CAUTION:
Always store the hose as illus-
Empty dust bag or paper filter.
Dust down or wash the dust bag.
Replace paper filter.
Charge the battery cartridge.
Charge the battery cartridge.
Set dust bag or paper filter.
Round brush
Flexible hose
Paper filter
Free nozzle
Seat nozzle
Crevice nozzle
Cyclone attachment
Dust bag
High performance dust bag
Soft bag
Makita genuine battery and charger
Fixing method
Tabla de contenido
loading

Tabla de contenido