USE & OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)
Pressing the MODE button until both "S" and "C" are illuminated will activate both Swing (Vertical
Louvers) and Cool modes simultaneously.
Note: When the "C" mode is not selected, the unit functions in a fan only mode, without evaporative
cooling.
SPEED
Press the SPEED button repeatedly to change the speed between High - Medium - Low.
The indicator light will show the selected speed:
TIMER
Press the TIMER button until the desired time duration setting is selected. When the set time has
passed, the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged
from electrical socket). The TIMER function allows you to program the unit for up to 7.5 hours of use.
SWING(H)
Press the SWING (H) button until the indicator light turns on. This activates the
Horizontal Louvers and they will begin to move up and down automatically.
ROOM COOLING AND HUMIDIFYING
In cooling mode, Honeywell Air Coolers provide cool, moist air through the
evaporation of water. There is a manual Water Regulator knob located
behind the ice compartment of the unit. This allows you to adjust the
amount of water pumped over the Honeycomb Cooling Media, thus helping
to control cooling and humidification levels.
When the Water Regulator is set to MIN, the water pump distributes a
minimal amount of water to the Honeycomb Cooling Media. This results in
less water evaporation and reduces the cooling effect.
When the Water Regulator is set to MAX, the water pump distributes the maximum amount of water to
the Honeycomb Cooling Media. This results in maximum water evaporation and greater cooling
performance.
REMOTE CONTROL
ON/OFF
SWING (H)
TIMER
MODE
SPEED
High (H)
Medium (M)
POWER
SWING
TIMER
MODE
SPEED
EN
: ON / OFF
: Controls the motion of the horizontal louvers
: Controls the Timer function for automatic off
: Controls the motion of the vertical louvers and
evaporative Cooling On / Off
: Low / Medium / High
2
Low (L)
Water Regulator
MAX
MIN
LOUVER
MOVEMENT